The recovery of tensile ductility in diffusion-bonded Ni-base alloys by post-bond heat treatments

作者：Sah Injin; Kim Donghoon; Lee Ho Jung; Jang Changheui^*

来源：Materials & Design, 2013, 47: 581-589.

DOI：10.1016/j.matdes.2012.12.061

• Diffusion bonding
• Post-bond heat treatment
• Nickel alloys
• Tensile ductility

The effects of post-bond heat treatments on the microstructure and tensile properties of diffusion-bonded Ni-base superalloys, Alloy 617 and Haynes 230, were investigated. In the as-bonded condition, precipitates including carbides and oxides were extensively observed along the bond-line. To remove the precipitates, post-bond heat treatments were applied at temperatures ranging from 1000 to 1200 degrees C for up to 100 h. In the as-bonded condition, a significant loss of ductility was observed, especially at 900 degrees C, for both alloys. Also, the final fracture occurred at the bond-line in the form of a brittle fracture in the as-bonded condition. As the post-bond heat treatment temperature was increased, the tensile ductility at 900 degrees C improved significantly while the strength decreased to a certain extent. The recovery of the tensile ductility was closely related to the dissolution of precipitates during the post-bond heat treatments. Eventually, the tensile ductility of diffusion-bonded Ni-base alloys at 900 degrees C was increased to half that of the base metal by the post-bond heat treatments.

• 出版日期2013-5