科研之友
微信
新浪微博
Facebook
分享链接
摘要
Purpose To investigate the effect of implant positioning on ulnohumeral contact using patient specific distal humeral (DH) implants. Methods Seven reverse-engineered DH implants were manufactured based on computed tomography scans of their osseous geometry. Native ulnae were paired with corresponding native humeri and custom DH implants in a loading apparatus. The ulna was set at 90 degrees of flexion and the humeral component (either native bone or reverse-engineered implant) was positioned from 5 degrees varus to 5 degrees valgus in 2.5 degrees increments under a 100-N compressive load. Contact with the ulna was measured with both the native distal humerus and the reverse-engineered DH implant at all varus-valgus (VV) angles, using a joint casting method. Contact patches were digitized and analyzed in 4 ulnar quadrants. Output variables were contact area and contact pattern. Results Mean contact area of the native articulation was significantly greater than with the distal humeral hemiarthroplasty (DHH) implants across all VV positions. Within the native condition, contact area did not significantly change owing to VV angulation. Within the DHH condition, contact area also did not significantly change owing to VV angulation. Conversely, in the DHH condition, contact pattern did significantly change. Medial ulnar contact pattern was significantly affected by VV angulation. Lateral ulnar contact was variably affected, but generally decreased as well. Conclusions Ulnar contact patterns were changed as a result of VV implant positioning using reverse-engineered DH implants, most notably on the medial aspect of the joint. Implant positioning plays a crucial role in producing contact patterns more like those observed in the native joint.
- 出版日期2017-8
