A two-layer mesh method for discrete element simulation of gas-particle systems with arbitrarily polyhedral mesh

作者：Su Junwei; Gu Zhaolin; Chen Chungang^*; Xu Xiao Yun

来源：International Journal for Numerical Methods in Engineering, 2015, 103(10): 759-780.

DOI：10.1002/nme.4911

• dynamic simulation
• fluidization
• multiphase particle flows
• discrete element method
• two-layer mesh method

Inter-phase momentum coupling for particle flows is usually achieved by means of direct numerical simulation (DNS) or point source method (PSM). DNS requires the mesh size of the continuous phase to be much smaller than the size of the smallest particle in the system, whereas PSM requires the mesh size of the continuous phase to be much larger than the particle size. However, for applications where mesh sizes are similar to the size of particles in the system, neither DNS nor PSM is suitable. In order to overcome the dependence of mesh on particle sizes associated with DNS or PSM, a two-layer mesh method (TMM) is proposed. TMM involves the use of a coarse mesh to track the movement of particle clouds and a fine mesh for the continuous phase, with mesh interpolation for information exchange between the coarse and fine mesh Numerical tests of different interpolation methods show that a conservative interpolation scheme of the second order yields the most accurate results. Numerical simulations of a fluidized bed show that there is a good agreement between predictions using TMM with a second-order interpolation scheme and the experimental results, as well as predictions obtained with PSM.

• 出版日期2015-9-7
• 单位西安交通大学