An Analysis of Variable-Speed Wind Turbine Power-Control Methods with Fluctuating Wind Speed

作者：Kim Yun Su^*; Chung Il Yop; Moon Seung Il

来源：Energies, 2013, 6(7): 3323-3338.

DOI：10.3390/en6073323

• power coefficient
• power quality
• wind-speed fluctuations

Variable-speed wind turbines (VSWTs) typically use a maximum power-point tracking (MPPT) method to optimize wind-energy acquisition. MPPT can be implemented by regulating the rotor speed or by adjusting the active power. The former, termed speed-control mode (SCM), employs a speed controller to regulate the rotor, while the latter, termed power-control mode (PCM), uses an active power controller to optimize the power. They are fundamentally equivalent; however, since they use a different controller at the outer control loop of the machine-side converter (MSC) controller, the time dependence of the control system differs depending on whether SCM or PCM is used. We have compared and analyzed the power quality and the power coefficient when these two different control modes were used in fluctuating wind speeds through computer simulations. The contrast between the two methods was larger when the wind-speed fluctuations were greater. Furthermore, we found that SCM was preferable to PCM in terms of the power coefficient, but PCM was superior in terms of power quality and system stability.

• 出版日期2013-7