Multi-objective optimization of the building energy performance: A simulation-based approach by means of particle swarm optimization (PSO)

作者：Delgarm, N.; Sajadi, B.^*; Kowsary, F.; Delgarm, S.

来源：Applied Energy, 2016, 170: 293-303.

DOI：10.1016/j.apenergy.2016.02.141

• Building energy performance
• EnergyPlus
• jEPlus
• MATLAB
• Multi-objective optimization
• Particle swarm optimization (PSO)

This paper proposes an efficient methodology for the simulation-based multi-objective optimization problems, which addresses important limitations for the optimization of the building energy performance. In this work, a mono- and multi-objective particle swarm optimization (MOPSO) algorithm is coupled with EnergyPlus building energy simulation software to find a set of non-dominated solutions to enhance the building energy performance. To evaluate the capability and effectiveness of the approach, the developed method is applied to a single room model, and the effect of building architectural parameters including, the building orientation, the shading overhang specifications, the window size, and the glazing and the wall material properties on the building energy consumption are studied in four major climatic regions of Iran. In the optimization section, mono-criterion and multi-criteria optimization analyses of the annual cooling, heating, and lighting electricity consumption are examined to understand interactions between the objective functions and to minimize the annual total building energy demand. The achieved optimum solutions from the multi-objective optimization process are also reported as Pareto optimal fronts. Finally, the result of multi-criteria minimization is compared with the mono criterion ones. The results of the triple-objective optimization problem point out that for our typical model, the annual cooling electricity decreases about 19.8-33.3%; while the annual heating and lighting ones increase 1.7-4.8% and 0.5-2.6%, respectively, in comparison to the baseline model for four diverse climatic regions of Iran. In addition, the optimum design leads to 1.6-11.3% diminution of the total annual building electricity demand. The proposed optimization method shows a powerful and useful tool that can save time while searching for the optimal solutions with conflicting objective functions; therefore facilitate decision making in early phases of a building design in order to enhance its energy efficiency.

• 出版日期2016-5-15