Mechanical properties of aligned multi-walled carbon nanotube/epoxy composites processed using a hot-melt prepreg method

作者：Ogasawara Toshio^*; Moon Sook Young; Inoue Yoku; Shimamura Yoshinobu

来源：Composites Science and Technology, 2011, 71(16): 1826-1833.

DOI：10.1016/j.compscitech.2011.08.009

• Carbon nanotubes
• Nanocomposites
• Stress-strain curves

This study examined the mechanical properties of aligned multi-walled carbon nanotube (CNT)/epoxy composites processed using a hot-melt prepreg method. Vertically aligned ultra-long CNT arrays (forest) were synthesized using chemical vapor deposition, and were converted to horizontally aligned CNT sheets by pulling them out. An aligned CNT/epoxy prepreg was fabricated using hot-melting with B-stage cured epoxy resin film. The resin content in prepreg was well controlled. The prepreg sheets showed good drapability and tackiness. Composite film specimens of 24-33 mu m thickness were produced, and tensile tests were conducted to evaluate the mechanical properties. The resultant composites exhibit higher Young's modulus and tensile strength than those of composites produced using conventional CNT/epoxy mixing methods. For example, the maximum elastic modulus and ultimate tensile strength (UTS) of a CNT (21.4 vol.%)/epoxy composite were 50.6 GPa and 183 MPa. These values were, respectively, 19 and 2.9 times those of the epoxy resin.

• 出版日期2011-11-14