科研之友
微信
新浪微博
Facebook
分享链接
摘要
In this work. we study the dispersion of elastic waves in piezoelectric infinite plates with ferroelectric inversion layers. The motivation is to analyze the effect of ferroelectric inversion layers on wave dispersion and resonant behavior under impulsive line loads. A semi-analytical finite-element (SAFE) method has been adopted to analyze the problem. Two model problems are considered for analysis. In one. the plate is composed of a layer of 36 degrees rotated y-cut LiNbO3 with a ferroelectric inversion layer. In the other, material is PZT-4 with a ferroelectric inversion layer. Comparison with experimental results, reported in the literature for isotropic materials, shows a very good agreement with theoretical predictions obtained using SAFE method. Furthermore, comparison of the resonance frequencies of the S, modes, calculated using KLM approximation (f(o) = Cd/2h) and SAFE method, are illustrated for each problem. The frequency spectra of the Surface displacements show that resonant peaks occur at frequencies where the group velocity vanishes and the phase velocity remains finite. i.e., a minimum in the dispersion Curve below the cut-off frequency. The effect of the ratio of the thicknesses of the inversion layer (IL) and the plate on the frequencies and strength of the resonant peaks is examined. It is observed that for PZT-4 with 50% IL to plate thickness ratio the frequency for the second resonant peak is about twice that for the first one. Results are presented showing the dependence of resonant frequencies on the material properties and anisotropy. Materials selection for single-element harmonic ultrasound transducers is a very important factor for Optimum design of transducers with multiple thickness-mode resonant frequencies. The theoretical analysis presented in this Study Should provide a means for optimum ultrasound transducer design for harmonic imaging in medical applications.
- 出版日期2008-9
