A proposal for the maximum use of recycled concrete sand in masonry mortar design

作者：Fernandez Ledesma E; Jimenez J R^*; Ayuso J; Corinaldesi V; Iglesias Godino F J

来源：Materiales de Construccion, 2016, 66(321): e075.

DOI：10.3989/mc.2016.08414

• Mortar
• Compressive Strength
• Mechanical Properties
• Retraction
• Waste Treatment

Natural sand mining from rivers and seashores is causing serious environmental problems in many parts of the world, whereas the fine fraction from recycling concrete waste is underutilized as a construction material. The aim of this paper is to determine the maximum replacement level of natural sand by recycled sand in the manufacturing of masonry mortar (M-10). For this purpose, five replacement levels were tested: 0%, 25%, 50%, 75% and 100% by volume. The mixes were made using cement CEM II/BL 32.5 N in a volumetric proportion of cement-to-aggregate of 1:5. A commercial admixture was used at a constant content. The amount of water was variable to achieve a consistency of 175 +/- 10 mm. The short-and long-term mortar properties were evaluated. The data were analyzed using a one-way ANOVA. In conclusion, a maximum percentage of 50% recycled concrete sand can be used in an indoor environment.

• 出版日期2016-3