Development and transient performance results of a single stage activated carbon - HFC 134a closed cycle adsorption cooling system

作者：Banker N D; Prasad M; Dutta P; Srinivasan K^*

来源：Applied Thermal Engineering, 2010, 30(10): 1126-1132.

DOI：10.1016/j.applthermaleng.2010.01.027

• Adsorption
• Refrigeration
• Activated carbon
• HFC 134a
• Experimental data

A laboratory model of a thermally driven adsorption refrigeration system with activated carbon as the adsorbent and 1,1,1,2-tetrafluoroethane (HFC 134a) as the refrigerant was developed. The single stage compression system has an ensemble of four adsorbers packed with Maxsorb II specimen of activated carbon that provide a near continuous flow which caters to a cooling load of up to 5W in the 5-18 degrees C region. The objective was to utilise the low grade thermal energy to drive a refrigeration system that can be used to cool some critical electronic components. The laboratory model was tested for its performance at various cooling loads with the heat source temperature from 73 to 93 degrees C. The pressure transients during heating and cooling phases were traced. The cyclic steady state and transient performance data are presented.

• 出版日期2010-7