Morphological evolution of TiO2 nanotube arrays with lotus-root-shaped nanostructure

作者：Yu Dongliang; Song Ye; Zhu Xufei^*; Yang Ruiquan; Han Aijun

来源：Applied Surface Science, 2013, 276: 711-716.

DOI：10.1016/j.apsusc.2013.03.158

• TiO2 nanotube
• Anodization
• Oxygen bubble mold
• Formation mechanism

TiO2 nanotube arrays (TNAs) with lotus-root-shaped nanostructure have been fabricated by a modified two-step electrochemical anodization method. In the present work, different morphologies formed under different anodizing voltages are investigated in detail by field-emission scanning electron microscope. The results show that the concaves left by the first-step anodization can guide the uniform growth of TNAs in some degree as the second-step anodizing voltage is the same with that in the first step, however, when lower voltages are adopted in the second-step anodization, no guidance can be achieved, and different morphological TNAs with lotus-root-shaped nanostructure are fabricated. And we find that the nanotube diameters are directly proportional to the applied voltage in the second-step anodization. Furthermore, a possible mechanism for the growth of the TiO2 nanotubes with the special morphology is proposed for the first time, which depends on both the oxygen bubble mold and the viscous flow of the barrier oxide from the pore base to the pore wall.

• 出版日期2013-7-1
• 单位南京大学