Mechanical performance of laminated composites incorporated with nanofibrous membranes

作者：Liu L; Huang Z M^*; He C L; Han X J

来源：Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2006, 435: 309-317.

DOI：10.1016/j.msea.2006.07.064

• nanofibrous membrane
• electrospinning
• interlaminar interface
• laminate
• mechanical property

The effect of non-woven nanofibrous membranes as interlaminar interfaces on the mechanical performance of laminated composites was investigated experimentally. The nanofibrous membranes are porous, thin and lightweight, and exhibit toughness and strength to some extent. They give little increase in weight and thickness when incorporated into a laminate. More important, they can be used as a functional agent carrier for the laminate. The nanofiber membranes used in this paper were prepared by electrospinning of Nylon-6 (PA6), Epoxy 609 (EPO 1691-410) and thermoplastic polyurethane (TPU), with a thickness ranging from 20 to 150 mu m. The non-woven fabrics were attached to one side of a glass/epoxy fabric lamina prior to lamination and each fabric was arranged in between two adjacent plies of the laminate. The nanofibrous membranes were characterized through scanning electron microscopy (SEM) and tensile testing, whereas the mechanical properties of the laminate were understood in terms of three-point bending and short-beam shear tests. Results have shown that the nanofibrous membranes in the ply interfaces with a proper thickness did not affect the mechanical performance of the composite laminates significantly.

• 出版日期2006-11-5
• 单位同济大学