Limitations on linear elastic procedures in performance assessment of regular frames

作者：Sucuoglu Haluk^*; Ozcamur Ugurcan

来源：Earthquake Engineering & Structural Dynamics, 2015, 44(15): 2659-2675.

DOI：10.1002/eqe.2602

• linear procedures
• limitations
• demand to capacity ratio
• performance assessment
• collapse prediction

Linear elastic analysis procedures are employed exclusively in the traditional seismic design of new structures and widely employed in the seismic assessment of existing structures. It is also a convenient tool for the initial checking of deformations in displacement-based design. The limitations that should be imposed on linear elastic procedures have been evaluated in this study by comparing the deformation-based response quantities obtained from response spectrum analysis with those from the nonlinear time history analysis. Both procedures were applied to different design variants of 5, 8, and 12 story moment frames, subjected to 20 strong motion components exhibiting a variety of intensities. Member plastic rotations and interstory drift ratios were employed as the basic response parameter in performance assessment. It has been found that average column demand to capacity ratio (DCR) (the ratio of flexural demand from linear elastic analysis to flexural capacity) and average beam DCR at the critical story are the most effective parameters in determining the validity range of linear elastic procedures in regular moment frames. Limiting values for these response parameters are proposed. Furthermore, amplification factors for member rotation demands predicted by the linear procedures are suggested for moment frames when these limiting values are exceeded. These factors ensure that the amplified linear elastic rotations are not smaller than 84 percentile (mean - 1sigma) of the rotations obtained from nonlinear time history analysis.

• 出版日期2015-12