科研之友
微信
新浪微博
Facebook
分享链接
摘要
During tapping liquid steel from a converter to a ladle, slag may carry over due to a formation of free surface vortex. Such vortex should be suppressed in order to minimize contamination of the steel by slag. In the present study, a new idea is proposed to minimize the vortex formation by applying dual tapping hole system. The idea was tested using a rectangular shape water vessel with dual tapping holes, supplemented by a numerical simulations, in order to evaluate feasibility of the dual tapping hole system. Both the water model experiment and the numerical simulation showed similar tendencies that the dual tapping hole system is promising to prevent the vortex formation. Experimental results showed that the free surface vortex formation is highly sensitive to shape and configuration of the nozzle. From the numerical simulation, flow characteristics were obtained, and vortex canceling between two nozzles is confirmed. Effect of dual tapping hole increased with increasing distance between two holes in the present experimental condition. Finally, a 1/7.8 scale-down water vessel simulating a real converter was employed in order to confirm the validity of the above findings. The result showed almost the same tendencies with the previous findings.
- 出版日期2016-1
