An innovative small-scale two-stage axial turbine for low-temperature organic Rankine cycle

作者：Al Jubori Ayad M; Al Dadah Raya; Mahmoud Saad

来源：Energy Conversion and Management, 2017, 144: 18-33.

DOI：10.1016/j.enconman.2017.04.039

• Organic Rankine cycle (ORC)
• Small-scale
• Two-stage axial turbine
• CFD
• Organic fluids
• Low-temperature heat sources

High expander efficiency is required to achieve best performance for small-scale organic Rankine cycle (ORC) systems driven by low-temperature (< 100 degrees C) heat sources. In this paper a small-scale two-stage axial turbine is modelled and compared with a single-stage axial turbine, with the aim of enhancing the ORC performance by increasing its pressure ratio. The preliminary mean-line design approach is coupled with three-dimensional CFD modelling and ORC cycle analysis was used to assess the impact of two-stage axial turbine on the ORC cycle performance. Three-dimensional CFD analysis of the single and two stage axial turbines was performed using ANSYS (R)(17)-CFX software. The RANS equations with a k-omega SST turbulence model were solved for three-dimensional viscous steady state flow. The real gas thermodynamic properties of three organic working fluids (n-pentane, R141b, R245fa) are used in modelling the flow with both turbine configurations. Results revealed that the two-stage axial turbine configuration exhibited a substantially higher turbine performance, with overall isentropic efficiency of 83.94% and power output of 16.037 kW, compared to 78.30% and 11.06 kW from the single-stage configuration, with n-pentane as working fluid and mean diameter of 64 mm for the two-stage configuration. Also, results showed that the maximum ORC thermal efficiency was 14.19% compared with 10.5% for single-stage configuration using n-pentane as the working fluid. These results highlight the potential of using two-stage axial turbine in a small-scale ORC's system for the conversion of low-temperature heat sources into electricity.

• 出版日期2017-7-15