A fatigue life prediction method for coke drum base, weld, and HAZ materials from tensile properties

作者：Chen Jie; Xia Zihui^*

来源：Materials & Design, 2014, 63: 575-583.

DOI：10.1016/j.matdes.2014.06.056

• Low cycle fatigue
• Fatigue life prediction
• Weld materials
• Heat affected materials

The importance of material fatigue information in design has been well recognized. There are a few existing fatigue life prediction methods based on materials tensile properties. Some of these fatigue life prediction methods can be successfully applied for non-heat affected materials. However, industrial components, such as pressure vessel and pipelines are commonly constructed by welding parts together. The fatigue lives of welded section and its surrounding material could be greatly affected by the welding process. Therefore, it is beneficial to develop a fatigue life prediction model for the weld and surrounding heat affected zone (HAZ) materials based on their tensile testing data. In this paper, fatigue lives of base material and its weld and HAZ materials for constructing coke drums are studied. Mechanical properties are first obtained from the tensile tests. Then, fully-reversed strain-controlled fatigue tests were performed. It is found that the fatigue life of pure base material is roughly twice of the weld and four time of the HAZ at the same strain amplitude. Four-point correlation (FPC) method by Manson can reasonably predict the life of base material. However, it over-predicts the lives of weld and HAZ. By introducing two reduction factors R-plastic and R-elastic for the weld and HAZ material respectively into the FPC method, the over-prediction can be rectified. Therefore, the proposed modified FPC method could be applied in predicting fatigue lives of weld and HAZ materials.

• 出版日期2014-11