科研之友
微信
新浪微博
Facebook
分享链接
摘要
Introduction: Conventional rigid endoscope requires a bundle of optic fibers for illumination and a set of camera for viewing body cavity. The design is bulky in the hand-held part and the laterally positioned optic fibers may hinder manipulation of instruments, especially in single port surgery. We designed a simplified unit to replace conventional endoscope. Materials and methods: We used an independent front image sensor along with six light emitting diode crystals. A wireless module working in 2.4 GHz and its antenna were integrated into the hand-help part. Two 800 mA batteries were used for power supply. The study was tested in two 35 kg pigs. Some simple thoracoscopic and laparoscopic operations were simulated to test the reliability and surgeon's acceptability. Results: Signal Noise ratio can be controlled well in the setting of the operative room. Signal transmission was influenced significantly when covered by damped gauze or drape. The best quality of wireless transmission is through line-of-sight. Dropping frame is less than 1 frame per second in 99% time period during the test. Conclusion: Wireless modules in the design of rigid endoscope may be a plausible option with good acceptability.
- 出版日期2015-7
