Normal contact stiffness fractal model considering asperity elastic-plastic transitional deformation mechanism of joints

作者：He Liange; Zuo Zhengxing; Xiang Jianhua

来源：Journal of Shanghai Jiaotong University, 2015, 49(1): 116-121.

DOI：10.16183/j.cnki.jsjtu.2015.01.020

• Asperity
• Elastic-plastic contact
• Fractal model
• Machine joints
• Normal contact stiffness

Based on the contact mechanics theory, the deformation behavior of a single contacting asperity was studied, a micro contact model was proposed considering elastic-plastic transition deformation mechanism of rough surface joints, and a mathematical model of normal contact load and contact stiffness were established. Besides, the fractal model of mechanical joints normal contact load and contact stiffness were presented based on the fractal geometry theory. The results show that the plasticity index is lesser, the relationship between normal contact load and contact stiffness is approximately linear, and with the plastic index increasing, the relationship between normal contact load and contact stiffness is strongly nonlinear. The normal contact stiffness increases with increasing fractal dimension and normal contact load and decreases with increasing dimensionless fractal scale parameters. Moreover, the joints normal contact stiffness whose machining surface were milled and ground were calculated respectively by using the present model. The comparion of test results show that the present model is consistent with the experiment result.

• 出版日期2015
• 单位北京理工大学