Adsorption of Lead(II) Ions onto Magnetite Nanoparticles

作者：Wang, Xue Song^*; Lu, Hai Jie; Zhu, Lei; Liu, Fei; Ren, Jun Jun

来源：Adsorption Science and Technology, 2010, 28(5): 407-417.

DOI：10.1260/0263-6174.28.5.407

• SURFACE
• REDUCTION
• REMOVAL
• COMPLEXATION
• MACKINAWITE
• SORPTION
• SOLIDS
• CR(VI)
• WATER

Magnetite nanoparticles were applied for the removal of lead(II) ions from aqueous solution as a function of pH, contact time, supporting electrolyte concentration and initial analytical Pb(II) ion concentration. The highly crystalline nature of the magnetite structure with pore diameters of ca. 10 nm was characterized by transmission electron microscopy (TEM) and X-ray diffractometry (XRD). The surface area was determined as 115.3 m(2)/g. The surface chemical properties of magnetite in aqueous solution at 25 degrees C were investigated. @@@ Batch experiments were carried out to determine the adsorption kinetics and adsorption mechanism of Pb(II) ions by the magnetite nanoparticles. The adsorption of Pb(II) ions was mainly governed by surface complexation, with the adsorption process being pH-dependent. In NaCl solutions, Pb(II) ion adsorption increased with increasing ionic strength; however, in NaClO4 solutions, Pb(II) ion adsorption exhibited little dependence on the ionic strength of the solution. @@@ Kinetic studies were performed to understand the mechanistic steps involved in the adsorption process. The adsorption kinetic data for Pb(II) ions were best fitted by the fractional power equation. The Langmuir and Freundlich adsorption isotherms were applicable to the equilibrium adsorption process and the corresponding constants were evaluated. The maximum adsorption capacity (q(m)) calculated from the Langmuir isotherm was found to be 0.1105 mmol/g for Pb(II) ions at a pH value of 5.0 and at 25 degrees C.

• 出版日期2010
• 单位淮海工学院