Analytical solutions for flexural design of hybrid steel fiber reinforced concrete beams

作者：Mobasher Barzin^*; Yao Yiming; Soranakom Chote

来源：Engineering Structures, 2015, 100: 164-177.

DOI：10.1016/j.engstruct.2015.06.006

• Cracking
• Hybrid reinforced concrete
• Flexural reinforcement
• Strain softening
• Deflection hardening
• Residual tensile strength
• Moment-curvature
• Analytical model

Hybrid reinforced concrete (HRC) is referred to as a structural member that combines continuous reinforcement with randomly distributed chopped fibers in the matrix. An analytical model for predicting flexural behavior of HRC which is applicable to conventional and fiber reinforced concrete (FRC) is presented. Equations to determine the moment-curvature relationship, ultimate moment capacity, and minimum flexural reinforcement ratio are explicitly derived. Parametric studies of the effect of residual tensile strength and reinforcement ratio are conducted and results confirm that the use of discrete fibers increases residual tensile strength and enhances moment capacity marginally. However improvements in post-crack stiffness and deformation under load is substantial in comparison to conventional steel reinforcement. Quantitative measures of the effect of fiber reinforcement on the stiffness retention and reduction of curvature at a given applied moment are obtained. The approach can also be presented in a form of a design chart, representing normalized moment capacity as a function of residual tensile strength and reinforcement ratio. Numerical simulations are conducted on the steel fiber reinforced concrete (SFRC) and HRC beam tests from published literature and the analytical solutions predict the experimental flexural responses quite favorably.

• 出版日期2015-10-1