Unsteady velocity profiling in bores and positive surges

作者：Leng Xinqian; Chanson Hubert^*

来源：Flow Measurement and Instrumentation, 2017, 54: 136-145.

DOI：10.1016/j.flowmeasinst.2017.01.004

• Positive surge
• Unsteady velocity profiling
• Instantaneous velocity
• Ensemble average
• Open channel flows
• Physical modelling

In an open channel, steady flow conditions may be achieved when the discharge and boundary conditions remain constant for a reasonable period of time. The operation of any regulation device (e.g. gate) is associated with some unsteady surge motion. In the present study, new velocity profiling measurements were performed systematically under controlled flow conditions. Both steady and unsteady measurements were conducted in a relatively large laboratory facility. An ensemble-averaged technique was applied in unsteady flows to investigate positive surges. The experiments were repeated 25 (or 50) times for each controlled flow condition and the results were ensemble-averaged. The quality and accuracy of the Profiler data set were validated against data collected with an acoustic Doppler velocimeter, in both steady and unsteady rapidly-varied flows. A careful sensitivity analysis was conducted to test the appropriate number of runs. The results indicated that the selection of 25 runs was suitable for ensemble-averaging in rapidly-varied unsteady flows. Some instrumental error was observed however with the velocity profiler. Outside the boundary layer, the Profiler tended to produce errors in terms time-averaged velocity data and velocity fluctuations for a number of points in a profile. Overall, the study demonstrated that the propagation of positive surges is a highly unsteady turbulent process, and the performance of ADV Vectrino II Profiler in such an unsteady turbulent flow was satisfactory, provided that a careful validation was undertaken for all Profiler outputs.

• 出版日期2017-4