Determination of optimal location to monitor temperature in low pressure die casting process

作者：Shi X M; Maijer D^*; Dumont G A

来源：Materials Science and Technology, 2011, 27(6): 1073-1083.

DOI：10.1179/1743284710Y.0000000041

• Low pressure die casting
• Finite element model
• Macroporosity
• Optimisation
• Correlation

Controlling and eliminating defects, such as macroporosity, in castings is a continuing challenge that manufacturers must continually address. Since the encapsulation of liquid regions by a solid shell and subsequent formation of macroporosity cannot be detected during casting, the die temperature, which is routinely measured, has been used as an indirect indicator of this defect. A finite element model has been developed to predict the evolution of temperature as well as the volume of encapsulated liquid in a casting with a high propensity to form macroporosity. The boundary conditions in the model were iteratively adjusted until the temperature predictions matched the experimental data for a variety of operational conditions. A model based methodology has been developed to analyse the correlation between the die temperature and the encapsulated liquid volume. This methodology is employed to assess the suitability of different in-cycle die temperatures for use as indicators of macroporosity formation, and to help determine the optimal location to monitor temperature for the purpose of minimising macroporosity.

• 出版日期2011-6