Microstructure and electrochemical behavior of cerium conversion coating modified with silane agent on magnesium substrates

作者：Lei, Li; Shi, Jing^*; Wang, Xin^*; Liu, Dan; Xu, Haigang

来源：Applied Surface Science, 2016, 376: 161-171.

DOI：10.1016/j.apsusc.2016.03.150

• Magnesium alloy
• Cerium conversion coating
• Silane agent
• Hydrophobic
• Corrosion resistance

The cerium conversion coating with and without different concentrations of silane agent bis-(gamma-triethoxysilylpropyl)-tetrasulfide (BTESPT) modification is obtained on magnesium alloys. Detailed properties of the coatings and the role of BTESPT as an additive are studied and followed with careful discussion. The coating morphology, wettability, chemical composition and corrosion resistance are characterized by scanning electronic microscope (SEM), water contact-angle, X-ray photoelectron spectroscopy (XPS), potentiodynamic measurements and electrochemical impedance spectroscopy (EIS). The electrochemical behavior of the coatings is investigated using EIS. The results indicate that the coating morphology and composition can be controlled by changing silane concentration. The combination of cerium ions and silane molecules could promote the formation of more homogenous and higher hydrophobic coating. The coating turns to be more compact and the adhesive strength between the coating and the magnesium substrate are strongly improved with the formation of Si-O-Si and Si-O-M chemical bonds. The optimum corrosion resistance of the coating in the corrosive media is obtained by 25 ml L-1 BTESPT modification. This whole study implies that the cerium conversion coating modified with certain silane agent deserves cautiousness before its application for corrosion resistance.

• 出版日期2016-7-15
• 单位中国海洋大学