Development of geomembrane strains in waste containment facility liners with waste settlement

作者：Yu Yan; Rowe R Kerry^*

来源：Geotextiles and Geomembranes, 2018, 46(2): 226-242.

DOI：10.1016/j.geotexmem.2017.11.004

• Geosynthetics
• Waste settlement
• Geomembrane strain
• Geosynthetic liner system
• Waste containment facility
• Numerical modelling
• FLAC

The development of tensile strains in geomembrane liners due to loading and waste settlement in waste containment facilities is examined using a numerical model. Two different constitutive models are used to simulate the waste: (a) a modified Cam-Clay model and (b) a Mohr-Coulomb model. The numerical analyses indicate the role of the slope inclination on the maximum geomembrane liner strains for both short-term loading (immediately post closure) and long-term waste settlement. A geosynthetic reinforcement layer over the geomembrane liner is shown to reduce the maximum geomembrane liner strains, but the strain level of the geosynthetic reinforcement itself may become an engineering concern on steeper slopes (i.e., greater than 3H:1V) for cases and conditions examined in this paper. The paper considers some factors (e.g., slope inclination, use of a high stiffness geosynthetic over the geomembrane liner) and notes others (e.g., the designer selection of interface characteristics below and above the geomembrane, use of a slip layer above the geomembrane) that warrant consideration and further investigation to ensure good long-term performance of geomembrane liners in waste containment facilities.

• 出版日期2018-4