A new technique for the strengthening of aluminum tungsten inert gas weld metals: Using carbon nanotube/aluminum composite as a filler metal

作者：Fattahi M^*; Nabhani N; Rashidkhani E; Fattahi Y; Akhavan S; Arabian N

来源：Micron, 2013, 54-55: 28-35.

DOI：10.1016/j.micron.2013.07.004

• Carbon nanotube
• Aluminum
• Weld metal
• Mechanical properties

The effect of multi-walled carbon nanotube (MWCNT) on the mechanical properties of aluminum multi-pass weld metal prepared by the tungsten inert gas (TIG) welding process was investigated. High energy ball milling was used to disperse MWCNT in the aluminum powder. Carbon nanotube/aluminum composite filler metal was fabricated for the first time by hot extrusion of ball-milled powders. After welding, the tensile strength, microhardness and MWCNT distribution in the weld metal were investigated. The test results showed that the tensile strength and microhardness of weld metal was greatly increased when using the filler metal containing 1.5 wt.% MWCNT. Therefore, according to the results presented in this paper, it can be concluded that the filler metal containing MWCNT can serve as a super filler metal to improve the mechanical properties of TIG welds of Al and its alloys.

• 出版日期2013-12
• 单位中国石油大学（北京）