Design of durability test protocol for vehicular fuel cell systems operated in power-follow mode based on statistical results of on-road data

作者：Xu, Liangfei^*; Reimer, Uwe; Li, Jianqiu; Huang, Haiyan; Hu, Zunyan; Jiang, Hongliang; Janssen, Holger; Ouyang, Minggao; Lehnert, Werner

来源：Journal of Power Sources, 2018, 377: 59-69.

DOI：10.1016/j.jpowsour.2017.11.075

• Polymer electrolyte membrane fuel cell
• Test protocol
• Duty cycle
• Power follow
• Statistic
• Optimization

City buses using polymer electrolyte membrane (PEM) fuel cells are considered to be the most likely fuel cell vehicles to be commercialized in China. The technical specifications of the fuel cell systems (FCSs) these buses are equipped with will differ based on the powertrain configurations and vehicle control strategies, but can generally be classified into the power-follow and soft-run modes. Each mode imposes different levels of electro-chemical stress on the fuel cells. Evaluating the aging behavior of fuel cell stacks under the conditions encountered in fuel cell buses requires new durability test protocols based on statistical results obtained during actual driving tests. In this study, we propose a systematic design method for fuel cell durability test protocols that correspond to the power-follow mode based on three parameters for different fuel cell load ranges. The powertrain configurations and control strategy are described herein, followed by a presentation of the statistical data for the duty cycles of FCSs in one city bus in the demonstration project. Assessment protocols are presented based on the statistical results using mathematical optimization methods, and are compared to existing protocols with respect to common factors, such as time at open circuit voltage and root-mean-square power.

• 出版日期2018-2-15
• 单位清华大学