Application of hybrid organic/inorganic polymers as coatings on metallic substrates

作者：Augustinho T R^*; Motz G; Ihlow S; Machado R A F

来源：Materials Research Express, 2016, 3(9): 095301.

DOI：10.1088/2053-1591/3/9/095301

• poly(methyl methacrylate)
• polysilazane
• coatings
• adhesion
• thermal resistance
• Brazilian MRS

Acrylic polymers, particularly poly (methyl methacrylate) (PMMA), have certain specific properties, such as good film formation, transparency, and good mechanical properties, which have been widely used in paints, coatings and adhesives. However, the limited chemical and physical stability of these pure polymers limits their applications when exposed to hostile conditions, as in ship hulls, for example. A suitable way to enhance PMMA properties is the addition of silicon polymers with very good protective characteristics. In this study, a PMMA and HTT 1800 (commercial silazane) copolymer were applied on. metallic substrate and compared to pure PMMA and HTT 1800. All the materials were applied as coatings. They were applied on stainless steel via dip-coating to investigate the coating properties. Thermal cycling was employed to analyze coating durability at high temperatures (50 degrees Cto 600 degrees C). Optical microscopy (OM) and scanning electron microscopy (SEM) were used to characterize the coated surfaces, and the adhesion of pure PMMA, pure HTT 1800 and PMMA/HTT 1800 coatings on. metallic substrate was investigated by Cross-Cut-Test (ASTMD 3359). The sessile drop method was used to determine the contact angle. PMMA coatings presented complete degradation from 250 degrees C, while hybrid coatings of PMMA and HTT 1800 have good protection until 400 degrees C. The adherence of the coating on metallic substrate showed improvement in all synthesized materials when compared to pure PMMA, obtaining the best adherence possible. The contact angle test showed that the hydrophobicity of the hybrid coatings is higher than that of the pure coatings.

• 出版日期2016-9