Assessment of a bond strength model for FRP reinforcement externally bonded over masonry blocks

作者：Ceroni Francesca; Ferracuti Barbara^*; Pecce Marisa; Savoia Marco

来源：Composites Part B: Engineering , 2014, 61: 147-161.

DOI：10.1016/j.compositesb.2014.01.028

• Debonding
• Carbon Fibers
• Glass Fibers
• Mechanical testing
• Masonry

According to recent design Codes and Recommendations, verification against debonding is imperative in the design of strengthening interventions with Fiber Reinforced Polymers (FRP). In FRP - reinforced masonry elements, debonding at reinforcement extremities (end debonding) must be avoided by limiting the maximum force achievable by the strengthening system. This paper proposes design criteria against debonding in masonry elements externally strengthened by FRP sheets. Results of more than 250 bond tests, reported in the literature and carried out over different masonry supports, clay bricks and natural stones, are collected and examined. Formulas for fracture energy of interface bond law and debonding load are assessed starting from the experimental database. In order to provide design formulas according to the Partial Safety Factor Method for Ultimate Limit State verification, mean and characteristic values of the debonding load are determined through statistical methods.

• 出版日期2014-5