Drivability analysis of through-the-road-parallel hybrid vehicles

作者：Galvagno E^*; Morina D; Sorniotti A; Velardocchia M

来源：Meccanica, 2013, 48(2): 351-366.

DOI：10.1007/s11012-012-9606-6

• Drivability
• Hybrid electric vehicle
• Linear powertrain model
• Sprung mass dynamics
• State space
• Vehicle pitch and shake motions
• Frequency response function
• Tip-in

In the last decade, Hybrid Electric Vehicles (HEVs) have spread worldwide due to their capability to reduce fuel consumption. Several studies focused on the optimisation of the energy management system of hybrid vehicles are available in literature, whilst there are few articles dealing with the drivability and the dynamics of these new powertrain systems. In this paper a %26apos;Through-the-Road-Parallel HEV%26apos; is analysed. This architecture is composed of an internal combustion engine mounted on the front axle and an electric motor powering the rear one. These two powertrains are not directly connected to each other, as the parallel configuration is implemented through the road-tyre force interaction. The main purpose of this paper is the drivability analysis of this layout of HEVs, using linearised mathematical models in both time (i.e. vehicle response during tip-in tests) and frequency domain (i.e. frequency response functions), considering the effect of the engaged gear ratio. The differences from a traditional Front-Wheel-Drive (FWD) configuration are subsequently highlighted. Furthermore, the authors compare different linearised dynamic models, with an increasing number of degrees of freedom, in order to assess which model represents the best compromise between complexity and quality of the results. Finally, a sensitivity analysis of the influence of the torque distribution between the front (thermal) and rear (electric) axles on vehicle drivability is carried out and presented in detail.

• 出版日期2013-3