All Solid State Nickel(II)-Selective Potentiometric Sensor Based on an Upper Rim Substituted Calixarene

作者：Kumar Pankaj^*

来源：Electroanalysis, 2012, 24(10): 2005-2012.

DOI：10.1002/elan.201200228

• Ni2+-selective electrodes
• All solid state sensors
• Potentiometric sensor
• Waste analysis
• Heavy metals

A new ionophore, i.e. p-(2-thiazolazo)calix[4]arene (I) has been explored for its selective behavior towards Ni(II) ions. A poly(vinyl chloride) based membrane containing (I) as an electroactive material along with sodiumtetraphenylborate (NaTPB), and nitrophenyloctyl ether in the ratio 10?:?100?:?3?:?150 (I:PVC:NaTPB:NPOE) (w/w) was used to fabricate an all solid state nickel(II)-selective sensor. The developed sensor exhibited a working concentration range of 1.0x10-61.0x10-1 M, with a Nernstian slope of 28.9 +/- 1.0 mV/decade of activity and a response time of 1015 s. This sensor shows a detection limit of 9.0x10-7 M. Its potential response remains unaffected of pH in the range 3.07.6, and the cell assembly could be used successfully in partially nonaqueous medium (up to 10?% v/v) without any significant change in the slope value or the working concentration range. The sensor worked satisfactorily for about ten weeks and exhibited excellent selectivity over a number of mono-, bi-, and tri-valent cations including alkali, alkaline earth metal, and transition metal ions. It could be used as an indicator electrode for the end point determination in the potentiometric titration of nickel ions against ethylenediaminetetraacetic acid (EDTA) as well as for the determination of nickel ion concentration in real samples.

• 出版日期2012-10
• 单位中国石油大学（北京）