Nitrogen-doped microporous carbon from polyaspartic acid bonding separator for high performance lithium-sulfur batteries

作者：Zhou, Xiangyang; Liao, Qunchao; Bai, Tao; Yang, Juan^*

来源：Journal of Electroanalytical Chemistry, 2017, 791: 167-174.

DOI：10.1016/j.jelechem.2017.03.004

• Lithium-sulfur batteries
• Modified separator
• Nitrogen doped
• Low-cost

Lithium-sulfur (Li-S) batteries are regarded as one of the great potential members for the next-generation re-chargeable batteries due to their outstanding theoretical energy density (2600 Wh kg(-1) low cost and environment friendliness. However, the further developments of Li-S batteries have been obstructed by the low electronic conductivity of active material and the diffusion of polysulfides. In this paper, we found a cheap raw material to. prepare a nitrogen doped porous carbon (NPC) by a simple method. Then, NPC was used to modify the pristine separator to promote the overall performance of Li-S batteries. With the NPC modified separator, a high initial discharge capacity of 1382 mAh g(-1) at 0.2 C and a low fading rate of 0.078% per cycle within 500 cycles at 0.5 C can be delivered by the pure sulfur cathode (1 C = 1675 mAh g(-1)), which attribute to the high-content nitrogen doped level and large specific surface area of NPC. This shows a great potential for the scale-up applications of Li-S batteries.

• 出版日期2017-4-15
• 单位中南大学