Design analysis of a high-Q micromechanical capacitive accelerometer system

作者：Chen, Shaodong; Xu, Honglin^*

来源：IEICE Electronics Express, 2017, 14(12): 20170410.

DOI：10.1587/elex.14.20170410

• accelerometer
• high-Q
• interface circuit

A micromechanical capacitive accelerometer system is analyzed in this paper, which includes a high-Q sensing element and a high-order switched-capacitor (SC) sigma-delta Sigma Delta CMOS interface circuit. The high-Q high-order topology obtained a sub-mu g/v root Hz noise floor. The loop stability is implemented by the operation of electrostatic feedback force, heavy phase compensation and the off-chip adjusting of distributed-feedback factors. The interface circuit is implemented in a standard 0.5 mu m CMOS process. The system consumes 12mW from a single 5V supply with the noise level of lower than 400 ng/v root Hz. The system bandwidth is 600 Hz and the input range of the accelerometer is +/- 0.7 g. The measured sensitivity of 2.5V/g is achieved.

• 出版日期2017-6-25
• 单位南阳理工学院