Low temperature sintering of copper biporous wicks with improved maximum capillary pressure

作者：Choi Jeehoon^*; Yuan Yuan; Sano Wataru; Borca Tasciuc Diana Andra

来源：Materials Letters, 2014, 132: 349-352.

DOI：10.1016/j.matlet.2014.06.090

• Low temperature sintering
• Sintered wick
• Copper nanoparticles
• Loop heat pipe

Copper nanoparticle films were successfully sintered at low temperatures of approximately 280 degrees C onto copper microporous wick substrates. Scanning electron microscopy was used to investigate the morphology of the nanoporous layer. The permeability and maximum capillary pressure measurements were carried out on the sintered biporous media before and after nanoparticle layer coating. It was found that the nanoparticle film enhanced the capillary pressure of the porous media up to two times although it also affected permeability. These materials have applications in loop heat pipes and miniature loop heat pipes systems, which are envisioned to become mainstream computer cooling technologies.

• 出版日期2014-10-1