Analysis for diving regulator applying local heating mechanism of vapor chamber in insert molding process

作者：Wang Jung Chang^*; Li Ai Tsung; Tsai Yu Pin; Hsu Ray Quen

来源：International Communications in Heat and Mass Transfer, 2011, 38(2): 179-183.

DOI：10.1016/j.icheatmasstransfer.2010.11.023

• Vapor chamber
• Insert molding
• Weld line
• Injection molding

This paper aims to use the local heating mechanism, along with the excellent thermal performance of vapor chamber, to analyze and enhance the strength of products formed after insert molding process. In the insert molding process, the metal insert is firstly placed into the mold, and then formed into an embedded plastic product named diving regulator by injection molding. These results indicate that, the product formed by the local heating mechanism of vapor chamber can reduce the weld line efficiency and achieve high strength, which passed the standard of 15.82 N-m torque test, with a yield rate up to 100%.

• 出版日期2011-2