A Hybrid Machining Process Combining Micro-EDM and Laser Beam Machining of Nickel Titanium-Based Shape Memory Alloy

作者：Al Ahmari A M A^*; Rasheed M Sarvar; Mohammed Muneer Khan; Saleh T

来源：Materials and Manufacturing Processes, 2016, 31(4): 447-455.

DOI：10.1080/10426914.2015.1019102

• EDM
• Holes
• Laser
• Machining
• Memory
• Micro
• Ni-Ti
• Shape

Micro-electrical discharge machining (EDM) is a slow process as compared to laser machining, on the contrary laser machining lacks good surface quality. To overcome the drawbacks of both these processes, this paper suggests a hybrid machining process which combines laser and micro-EDM processes for drilling microholes in advanced engineering materials such as Nickel-Titanium (Ni-Ti)-based shape memory alloy. To achieve the objective of the suggested hybrid process, pilot holes are drilled with laser machine and rimmed out by micro-EDM drilling. The suggested process requires investigation of various combinations of micro-EDM drilling process conditions to obtain optimum machining parameters for the hybrid process. It has been found that the proposed hybrid machining process resulted in 50-65% reduction in machining time without affecting the quality of microholes as compared to the standard micro-EDM process.

• 出版日期2016-3-11