科研之友
微信
新浪微博
Facebook
分享链接
摘要
Many studies have shown that dropwise condensation can enhance air-side heat transfer coefficients by at least an order of magnitude relative to filmwise condensation. However, among the hundreds of superhydrophobic surface-modification processes previously reported, there remains a lack of coating methods that enable stable dropwise condensation and can be applied to aluminum-by far the most common material for the air side of heat exchangers, e.g. in air conditioning. Here we present a bottom-up synthesis technique to grow zinc oxide-based films on to aluminum with tunable nanoporosity and strongly re-entrant surface features. These surfaces exhibit exceptional static water contact angles of up to 178 degrees with a hysteresis less than 3 degrees and a slide angle of 1 degrees. We have further characterized the surfaces in the presence of six different liquids, and show that our optimal surface can repel even dipropylene glycol with a contact angle of 124 degrees, even though its surface tension is less than half that of water. Crucially, we have also tested our films under water-condensing conditions in flowing air, characterizing the droplet-shedding behavior, and we have understood how to tune the growth process to deliver stable droplet-shedding instead of flooding. The process uses inexpensive reagents, can operate below 100 degrees C via immersion in an aqueous bath, and takes 1-3 h to complete, making it readily scalable to areas of many square meters and complex geometries.
- 出版日期2017-4
