X-CT imaging method for large objects using double offset scan mode

作者：Fu Jian^*; Lu Hongnian; Li Bing; Zhang Lei; Sun Jingjing

来源：Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment , 2007, 575(3): 519-523.

DOI：10.1016/.j.nima.2007.03.008

• computed tomography
• scan mode
• reconstruction algorithm
• offset scan

In X-ray computed tomography (X-CT) inspection, rotate-only scanner is commonly used because this configuration offers the highest imaging speed and best utilization of X-ray dose. But it requires that the imaging region of the scanned object must fit within the X-ray beam. Another configuration, transverse-rotate scanner, has a bigger field of view, but it is much more time consuming. In this paper, a two-dimensional X-CT imaging method for large objects is proposed to overcome the existing disadvantages. The scan principle of this method has been described and the reconstruction algorithm has been deduced. The results of the computer simulation and the experiments show the validity of the new method. Analysis shows that the scan field of view of this method is 1.8 times larger than that of rotate-only X-CT. The scan speed of this method is also much quicker than transverse-rotate X-CT.

• 出版日期2007-6-1
• 单位北京航空航天大学