科研之友
微信
新浪微博
Facebook
分享链接
摘要
The aero-thermal-coupled phenomenon is significant in modern cooled turbines, and an aero-thermal coupled through-flow method has previously been developed by the authors for considering the influence of heat transfer and coolant mixing in through-flow design. However, the original cooling model is not capable of calculating the distribution of the coolant mass flow rate and pressure loss in complex cooling structures. Therefore, in this paper, a one-dimensional flow calculation for the internal coolant is introduced into the heat transfer calculation to further improve the through-flow cooling model. Based on various empirical correlations, the cooling model can be used to simulate different cooling structures, such as ribbed channels and cooling holes. Three operating conditions were selected for verification of the NASA-C3X vane, which has 10 internal radial cooling channels. The calculated Nusselt number of internal cooling channels strongly agrees with the experimental data, and the predicted blade surface pressure and temperature distributions at mid span are also in good agreement with the experimental data. The convergence history of the meridional velocity and blade surface temperature demonstrates effective convergence properties. Therefore, the aero-thermal-coupled through-flow method with the new cooling model can provide a reliable tool for cooled turbine through-flow design and analysis.
- 出版日期2018-5
- 单位清华大学
