Development of cold spray process for oxidation-resistant FeCrAl and Mo diffusion barrier coatings on optimized ZIRLO (TM)

作者：Yeom Hwasung; Maier Benjamin; Johnson Greg; Dabney Tyler; Walters Jorie; Sridharan Kumar^*

来源：Journal of Nuclear Materials, 2018, 507: 306-315.

DOI：10.1016/j.jnucmat.2018.05.014

• Optimized ZIRLO (TM)
• Cold spray
• FeCrAl alloy
• Molybdenum
• Diffusion barrier layer
• Oxidation resistance

The cold spray process has been investigated for the deposition of FeCrAl coatings on optimized ZIRLO (TM) fuel cladding tubes in order to enhance oxidation resistance at high temperatures (>1000 degrees C) that would be encountered in loss of coolant accident (LOCA) scenarios. The FeCrAl alloy provides excellent oxidation resistance, however Fe forms a eutectic with Zr at temperatures as low as 928 degrees C resulting in massive inter-diffusion and associated melting. Therefore, a Mo interlayer coating was developed also using the cold spray process to serve as a diffusion barrier between the Fe-based coating and the Zr-alloy substrate. To achieve a combination of desired properties for the dual-layered coating-substrate, an optimization study of spray parameters such as propellant gas pre-heat temperature, helical spray speed, and the number of spray passes was conducted. This parametric study was aimed at achieving dense coatings with desired thickness and coverage of the substrate, and good adhesion of the Mo interlayer coating with subsequent top FeCrAl coating and the Zr-alloy substrate. The optimal FeCrAl-Mo coating protected the Zr-alloy cladding tubes from oxidation at high temperatures of 1200 degrees C, while at the same time preventing diffusion-induced eutectic melting in the substrate.

• 出版日期2018-8-15