科研之友
微信
新浪微博
Facebook
分享链接
摘要
A sliding planar motion table system that can be used for the lens driving actuator of a laser cutting machine was developed. The system uses magnetic fluid as the lubricant to avoid the leakage of lubricating oil under the table and reduce environmental pollution. The motion table is suspended from the guide surface by an attractive force generated by electromagnets to reduce the contact and frictional forces between the table and the guide surface. The table is capable of movement in one rotational and two translational directions over the guide surface using six electromagnets and three non-contact displacement sensors. Experimental results showed that the magnetic suspension of the table reduced the friction by 82.1% compared to the friction that would otherwise be generated by the dead weight of the table. Circular motion within a diameter of 2 mm was achieved with resolutions of 5 mu m and 20 mu rad in the translational and rotational directions, respectively. A bandwidth of higher than 100 Hz was also achieved in the three movement directions. Published by AIP Publishing.
- 出版日期2016-6
- 单位清华大学
