A rapid and simple fabrication method for 3-dimensional circular microfluidic channel using metal wire removal process

作者：Song Suk Heung; Lee Chang Keun; Kim Tae Jin; Shin In cheol; Jun Seong Chan; Jung Hyo Il^*

来源：Microfluidics and Nanofluidics, 2010, 9(2-3): 533-540.

DOI：10.1007/s10404-010-0570-y

• 3-D microfluidic channel
• Circular shape
• Soldering wire
• Metal wire removal process

In this article, we introduce a rapid and simple fabrication method to realize a 3-dimensional (3-D) microfluidic channel with a near-perfect circular cross section. This new concept of fabrication method is defined by metal wire removal process, where the metal wire such as a thin soldering wire for the 3-D circular shape is commercially available. For the microfluidic channel mold, PDMS (polydimethylsiloxane) was poured on several shapes such as 3-D circular, helix, and double helix shapes, of soldering wire and solidified. The soldering wire was then melted out by heating. With the two-step process, rapidly and simply fabricated 3-D circular microfluidic channels can be obtained. CPAE (endothelial cell line) cells were cultured inside the channel to evaluate the biocompatibility of the fabricated microfluidic channel. Our method will be very useful in making various circular shapes of 3-D microfluidic devices that need multi-depth and round corners inside the channel.

• 出版日期2010-8