科研之友
微信
新浪微博
Facebook
分享链接
摘要
A theoretical model based on slab method is proposed to analyze asymmetrical rolling of bonded two-layer sheets where the ingoing sheet is forced to horizontally enter the roll gap. Separate equilibrium equations as well as yield relations are derived for each layer by considering different stress fields for the two layers of any slab within the roll gap. A large angle of bite is considered in the governing equations as the experimental data used for verifying the results belong to the rolling conditions where small bite angle assumption is not reasonable. The curvature of the sheet at exit from the roll gap is estimated by studying variations of the normal and the shear strains within the whole roll gap. A very good agreement is shown to exist between the rolling force as well as the outgoing curvature predicted by the present model and the available analytical and experimental results reported by other investigators. By studying the outgoing curvature at different conditions, some practical suggestions to minimize the strip curvature at exit from the roll gap are proposed.
- 出版日期2014-7
