MECHANICAL FLEXIBILITY OF ZINC OXIDE THIN-FILM TRANSISTORS PREPARED BY TRANSFER PRINTING METHOD

作者：Eun K T^*; Hwang W J; Sharma B K; Ahn J H; Lee Y K; Choa S H

来源：Modern Physics Letters B, 2012, 26(12): 1250077.

DOI：10.1142/S0217984912500777

• Transparent thin film transistor
• zinc oxide
• mechanical reliability
• bending test

In the present study, we demonstrate the performance of Zinc oxide thin film transistors (ZnO TFTs) array subjected to the strain under high bending test and the reliability of TFTs was confirmed for the bending fatigue test of 2000 cycles. Initially, ZnO TFTs were fabricated on Si substrate and subsequently transferred on flexible PET substrate using transfer printing process. It was observed that when the bending radius reached %26gt;= 11 mm then cracks start to initiate first at SiO2 bridges, acting as interconnecting layers among individual TFT. Whatever the strain is applied to the devices, it is almost equivalently adopted by the SiO2 bridges, as they are relatively weak compared to rest of the part. The initial cracking of destructed SiO2 bridge leads to the secondary cracks to the ITO electrodes upon further increment of bending radius. Numerical simulation suggested that the strain of SiO2 layer reached to fracture level of 0.55% which was concentrated at the edge of SiO2 bridge layer. It also suggests that the round shape of SiO2 bridge can be more fruitful to compensate the stress concentration and to prevent failure of device.

• 出版日期2012-5-20