科研之友
微信
新浪微博
Facebook
分享链接
摘要
Most of the magnesium alloys are relatively reactive and tend to suffer corrosion. Consequently, surface modifications are performed to enhance the corrosion resistance and paint adhesion of the base magnesium alloys. This work discuss with the non-chromate conversion coating on LZ91 magnesium alloy. The conversion coating treatment is conducted in an acidic cerium/permanganate solution with adding the different acidity regulators. These additives can adjust the pH value of the solution and influence the formation of anti-corrosion coatings on LZ91 substrate. The microstructure and composition of the conversion coating are characterized using SEM, EDS and cross-sectional TEM. The potentiodynamic polarization test, electrochemical impedance spectroscopy and salt spray test results show that the corrosion resistance of LZ91 alloy is markedly improved by the acidic cerium/permanganate conversion coating. The corrosion protection efficiency is related with the acidity regulator in the conversion solution. The film thickness also depends upon the acidity regulator used. Besides, micro-cracks are more obvious on the coating formed in the phosphoric acid bath. Therefore, the coating formed in the sulfuric acid bath does provide the LZ91 plate better corrosion protection when compared to the coating formed in the phosphoric acid bath.
- 出版日期2018-8
- 单位中国人民解放军国防大学
