科研之友
微信
新浪微博
Facebook
分享链接
摘要
Electrochromic tungsten oxide (WO(3)) films on ITO glass were fabricated by spin-coating with a tungsten peroxy acid solution, which was prepared by adding an equivolume mixture of hydrogen peroxide and glacial acetic acid to tungsten metal powder. The structural evolution of the tungstate precursor upon heat treatment was studied by X-ray diffraction (XRD) and X-ray absorption near edge structure (XANES) analyses, which indicated that the as-synthesized tungstate transformed into nanocrystalline WO(3) upon heating. It is, therefore, quite clear that as-synthesized tungstate can be a good precursor for electrochromic WO(3) films. A series of WO(3) thin films were prepared on ITO glass by spin-coating with different concentrations of tungsten peroxy acid solution and then post-annealing at various temperatures. Depending on the concentration of the tungstate coating solution (200 similar to 500 mg mL(-1)) and the annealing temperature (100 similar to 300 degrees C), the thickness and WO(3) content as well as the electrochromic properties of WO(3) films can be controlled. As a result, the optimum fabrication conditions were determined to be a tungstate solution concentration of 300 similar to 400 mg mL(-1) and a post-annealing temperature of 200 degrees C. Finally, an inorganic-inorganic hybrid electrochromic device (ECD) composed of optimized WO(3) and Prussian Blue (PB) with desirable coloration efficiency was successfully developed.
- 出版日期2011-7
