Determination of the growth restriction factor and grain size for aluminum alloys by a quasi-binary equivalent method

作者：Mitrasinovic A M^*; Hernandez F C Robles

来源：Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2012, 540: 63-69.

DOI：10.1016/j.msea.2012.01.072

• Aluminum alloys
• Casting
• Semisolid processing
• Nucleation
• Recrystallization

In the present research paper is suggested a new methodology to determine the growth restricting factor (Q) and grain size (GS) for various Al-alloys. The present method combines a thermodynamical component based on the liquidus behavior of each alloying element that is later incorporated into the well known growth restricting models for multi-component alloys. This approach that can be used to determine Q and/or GS based on the chemical composition and the slope of the liquidus temperature of any Al-alloy solidified in close to equilibrium conditions. This method can be modified further in order to assess the effect of cooling rate or thermomechanical processing on growth restricting factor and grain size. In the present paper is proposed a highly accurate (R-2 = 0.99) and validated model for Al-Si alloys, but it can be modified for any other Al-X alloying system. The present method can be used for alloys with relatively high solute content and due to the use of the thermodynamics of liquidus this system considers the poisoning effects of single and multi-component alloying elements.

• 出版日期2012-4-1