Development of a Micromechanical Grating Optical Modulator for Optical Network

作者：Yu Yiting^*; Yuan Weizheng; Yan Bin; Li Taiping

来源：Journal of Lightwave Technology, 2009, 27(24): 5681-5686.

DOI：10.1109/JLT.2009.2034757

• Grating optical modulator
• optical switch
• silico-non-glass (SOG) process
• variable optical attenuator (VOA)

In this paper, we present the design, fabrication, and characterization of a new micromechanical grating optical modulator. By applying a dc driving voltage to the electrostatic comb-drive actuator, the grating beams can be reconfigured. Experimental tests reveal that at a voltage of 45 V, the grating period can be altered from the initial 10 to 20 mu m, and correspondingly, the +/- first-order diffraction angle is changed from 3.86 degrees to 1.94 degrees for a normally incident laser beam (wavelength, 632.8 nm). While the measured modulation of optical intensity can be as large as 30.6 dB for +first order and -19.1 dB for +second order. The adoption of silicon-on-glass process for fabricating this grating optical modulator is simple, high yield, and with a very smooth optical surface. The modulator has a first-level resonant frequency of 21.539 kHz, enabling a fast-enough manipulation. When operated in a digital mode, the proposed grating optical modulator can be used as an optical switch and an analog mode for a variable optical attenuator. Both show potential applications for the future optical network.

• 出版日期2009-12-15
• 单位西北工业大学