Assessment of the effluent quality from a gold mining industry in Ghana

作者：Acheampong Mike A^*; Paksirajan Kannan; Lens Piet N L

来源：Environmental Science and Pollution Research, 2013, 20(6): 3799-3811.

DOI：10.1007/s11356-012-1312-3

• Cyanide
• Heavy metals
• Physico-chemical characteristics
• Gold mine wastewater
• Tailings dam
• Principal component analysis

The physical and chemical qualities of the process effluent and the tailings dam wastewater of AngloGold-Ashanti Limited, a gold mining company in Ghana, were studied from June to September, 2010. The process effluent from the gold extraction plant contains high amounts of suspended solids and is therefore highly turbid. Arsenic, copper and cyanide were identified as the major pollutants in the process effluent with average concentrations of 10.0, 3.1 and 21.6 mg L-1, respectively. Arsenic, copper, iron and free cyanide (CN-) concentrations in the process effluent exceeded the Ghana EPA discharge limits; therefore, it is necessary to treat the process effluent before it can be discharged into the environment. Principal component analysis of the data indicated that the process effluent characteristics were influenced by the gold extraction process as well as the nature of the gold-bearing ore processed. No significant correlation was observed between the wastewater characteristics themselves, except for the dissolved oxygen and the biochemical oxygen demand. The process effluent is fed to the Sansu tailings dam, which removes 99.9 % of the total suspended solids and 99.7 % of the turbidity; but copper, arsenic and cyanide concentrations were still high. The effluent produced can be classified as inorganic with a high load of non-biodegradable compounds. It was noted that, though the Sansu tailings dam stores the polluted effluent from the gold extraction plant, there will still be serious environmental problems in the event of failure of the dam.

• 出版日期2013-6