Acoustic emission techniques for failure characterisation in composite top-hat stiffeners

作者：Raju^*; Azmi A I; Prusty B G

来源：Journal of Reinforced Plastics and Composites, 2012, 31(7): 495-516.

DOI：10.1177/0731684412437986

• composites
• delamination
• acoustic emission
• fibre Bragg Grating
• parametric analysis
• transient analysis

Modern day aerospace, automotive, marine, mechanical and civil structures rely on the advanced composites for their added benefits over conventional metallic structures. The complex damage process in composites involves various failure modes such as matrix cracking, fibre-matrix debonding, fibre fracture and delamination. This paper presents an acoustic emission technique for the failure characterisation of top-hat stiffener specimens using conventional piezoelectric acoustic emission sensors and modern fibre Bragg Gratings. Strain insensitive fibre Bragg Grating sensors are used in this experimental investigation to compare the performance of piezoelectric sensors for composite structures. This work has contributed to the development of an acoustic emission sensing system based on fibre Bragg Gratings. Main objectives of this work are to compare the sensing characteristics simultaneously in a composite structure with a surface-bonded acoustic emission-fibre Bragg Grating sensor and acoustic emission-piezoelectric sensor. The feasibility of the system is demonstrated in typical applications of in-situ structural health monitoring based on acoustic emission techniques.

• 出版日期2012-4