A simple and easy one-step fabrication of thin BaZr(0.1)Ce(0.7)Y(0.2)O(3-delta) electrolyte membrane for solid oxide fuel cells

作者：Xie Kui; Yan Ruiqiang; Jiang Yinzhu; Liu Xingqin^*; Meng Guangyao

来源：Journal of Membrane Science, 2008, 325(1): 6-10.

DOI：10.1016/j.memsci.2008.07.055

• SOFC
• Proton
• Stable
• Membrane
• Sintering

A green BaZr(0.1)Ce(0.7)Y(0.2)O(3-delta) (BZCY) electrolyte layer was deposited on porous anode substrate (BZCY:NiO=35:65, in weight ratio) by a suspension spray. In this process, the suspension was prepared by directly ball-milling the mixed BaCO(3), CeO(2), ZrO(2) and Y(2)O(3) powders in ethanol for 24 h. Then the bilayers were co-sintered at 1400 degrees C for 5 h in air to obtain dense and uniform electrolyte membrane in the thickness of 10 mu m. With Nd(0.7)Sr(0.3)MnO(3-delta) a cathode, a fuel cell was assembled. It was tested from 600 C to 700 degrees C using humid hydrogen as fuel and air as oxidant. The cell at 700 degrees C exhibited 1.02V for open circuit voltage (OCV), 450 mW/cm(2) for peak output and 0.18 Omega cm(2) for electrode polarizations under open circuit conditions, respectively. The results indicate that it is feasible to fabricate thin electrolyte membrane for solid oxide fuel cells (SOFCs) by this simple, cost-effective and efficient technique.

• 出版日期2008-11-15
• 单位中国科学技术大学; 台州学院