Drying processes for preparation of titania aerogel using supercritical carbon dioxide

作者:Shimoyama Yusuke*; Ogata Yusuke; Ishibashi Ryota; Iwai Yoshio
来源:Chemical Engineering Research and Design, 2010, 88(10A): 1427-1431.
DOI:10.1016/j.cherd.2010.02.018

摘要

Supercritical carbon dioxide drying was performed for the preparation of titania aerogels from sol-gel routes. The conditions of supercritical carbon dioxide drying were 313-323 K and 7.8-15.5 MPa. The solvents in titania wet gels obtained from the sol-gel routes were replaced by acetone. The titania aerogels obtained from supercritical carbon dioxide drying form needle-like structures. In supercritical carbon dioxide drying, the extraction rates of acetone from the wet gels were measured by using an on-line Fourier transform infrared spectroscope. It was found that the titania aerogels with lower cohesion were induced from the formations of homogenous phase for carbon dioxide + acetone system and the lower extraction rates of acetone. Furthermore, titania films were prepared by the depositions of the titania aerogels on ITO-coated PET substrates. The needle-like aerogels with lower cohesion derive the titania film with high surface area.

  • 出版日期2010-10